Step 1.  To best use this product please collect the following information about your sign(s).

 

Size R * LA  What is the size of your signs in rows and letters across approximately?  The minimum is 2 rows by 10 letters across the maximum is 6 rows by 32 letters across. 

 

WP Does your sign use word panels?  This is where a word is on a panel instead of individual letters.    If you use word panels list them on a separate sheet of paper.  Word panels can be entered as signal or as a pair.

 

Label  side A  Example North side.

Label  side B  Example South side.

 

6 – 9  Can you use 6 and 9 interchangeably? Yes/ No

 

LC Does your sign use lower case letters on your sign?  Yes/No

 

On the back or a separate sheet of paper please write what is currently on your sign.

Under line any word panels.

 

 

 

Step 2.  Setup each sign.

From the Main Menu Select setup

 

Select a sign 1 through 6.

 

Next enter the collected information.  If  The Marquee Manager appears to run in slow motion.   Hold down the escape key until the main menu returns and press F9.  This will disable the mouse in the program.  The Marquee Manager will exit and step 2 will have to be repeated.

Step 3.  Enter what is on your sign right now.

 Select Edit Marquee.  From the Main Menu.

 

Select a sign 1 through 6.

 

Press F1 then Press zero to bring up the help index screen.

Use the mouse or the tab key to select FIRST TIME SETUP.

Read this before proceeding.      Back